drive propeller
Low-poly 3D Model

$9.99 -30%
$6.99
drive propeller 3D Model
$9.99 -30%
$ 6.99
Yer İşaretini Kaldırın Bu Ürünü İşaretleyin
  • Hazır formatlar:
    Hypershot: bip 538.04 kb
    Collada: dae 421.59 kb
    Autodesk FBX: fbx 386.51 kb
    Wavefront OBJ: obj 480.12 kb
    Stereolithography: stl 248.53 kb
    3DS MAX all ver.: 3ds 280.75 kb
  • Animasyon:
    No
  • Dokulu:
    No
  • Rigged:
    No
  • Malzemeler:
  • Low-poly:
  • Koleksiyon:
    No
  • UVW mapping:
    No
  • Kullanılan Eklentiler:
    No
  • Baskıya Hazır:
    No
  • 3D Tarama:
    No
  • Yetişkin(+18) içerik:
    No
  • PBR:
    No
  • Geometri:
    Polygonal
  • Unwrapped UVs:
    Unknown
  • Görüntülemeler:
    2788
  • Tarih:
  • Ürün ID:
    383754
  • Not:
a propeller is a device with a rotating hub and radiating blades that are set at a pitch to form a helical spiral, that, when rotated, exerts linear thrust upon a working fluid, such as water or air. propellers are used to pump fluid through a pipe or duct, or to create thrust to propel a boat through water or an aircraft through air. the blades are specially shaped so that their rotational motion through the fluid causes a pressure difference between the two surfaces of the blade by bernoulli's principle which exerts force on the fluid. most marine propellers are screw propellers with helical blades rotating on a propeller shaft with an approximately horizontal axis. Baskıya Hazır: Hayır
Daha fazla formata mı ihtiyaç duyuyorsunuz?
Farklı bir formata ihtiyaç duyuyorsanız lütfen destek ekibimize bir talep açarak ihtiyacınızı belirtiniz. 3D modelleri şu formatlara dönüştürebiliriz: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. 3d sahneleri dönüştürmüyoruz ve .step, .iges, .stp, .sldprt gibi formatlar.!

İndirme drive propeller 3D Model bip dae fbx obj stl 3ds Kimden Norezero

propeller watercraft propulsion ship boat yacht twinscrew shaft
Bu ürün için yorum bulunmamaktadır.